Watec WAT-902HB2S B/W CCTV Board Camera (Discontinued)
SKU
902HB2S EIA
Quick Overview
Watec WAT-902HB2S B/W CCTV Board Camera, Super High Sensitivity (.0003Lux), 1/2" CS mount, 570 TVL, 12VDC
Product is Discontinued, replacement camera is: WAT-1100MBD
The Watec WAT-902HB2S is a Super High Sensitivity Adjacent to Near Infra-Red Ray, Exposed Single PC Board camera. The Watec WAT-902HB2S features include back light compensation, gain control, internal sync and adjustable shutter speeds.
Signal System | NTSC |
Pick-up element | 1/2inch interline transfer CCD image sensor |
Number of total pixels | 811 (H) X 508 (V) (EIA) / 795 (H) X 596 (V) (CCIR) |
Effective pixels | 768 (H) X 494 (V) (EIA) / 752 (H) X 582 (V) (CCIR) |
| Unit cell size | 8.4μm(H)×9.8μm(V) (EIA) 8.6μm(H)×8.3μm(V) (CCIR) |
| Scanning system | 2:1 interlace |
| Synchronizing system | Internal |
| Video output | Composite video, １Vp-p, 75ohm Unbalanced |
| Resolution(Horizontal) | 570 TVL (center) |
| Minimum illumination | 0.0003 lx. F1.4 |
| Gamma Correction | γ≒0.45(ON) (option: γ≒1.0(OFF)) |
| AGC | HI: 5～50dB, LO: 5～32dB (option: OFF=5dB) |
| S/N Ratio | 50dB (AGC OFF) |
| AE Mode | EI=(1/60～1/100,000(EIA) or 1/50～1/100,000(NTSC)), (Option: ES=OFF(1/60(EIA), 1/50(CCIR)), FL, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, or 1/100000) |
| Backlight Compensation | ON/OFF |
| Lens Mount | CS-mount |
| Connection terminal | Power, Video out, GND |
| Power supply | DC10V～14V (DC12V±15％ recommended) |
| Current | 160mA (Max.190mA w/ AI lens) |
| Operating temperature | -10℃ ～ +40℃ |
| Storage temperature | -30℃ ～ +70℃ |
| Dimensions | 40.0 (W) X 40.0 (H) X 17.0 (D)mm (projections not included) |
| Weight | Approx. 25g |
| Accessories | K-59 (connector & cables), Hex key wrench |
