Ximea MC089MG-SY 8.9MP Monochrome USB3 Camera with SONY IMX255 CMOS Global Shutter Sensor, 41 FPS, 26.4 x 26.4 x 42 mm
The Ximea MC089MG-SY is a high-performance industrial monochrome camera equipped with a Sony IMX255 CMOS sensor featuring Pregius™ global shutter technology. It delivers an impressive 8.9 megapixel resolution (4112 x 2176 pixels) with a large 1-inch sensor and 3.45 µm pixel size, capturing precise, distortion-free images at a frame rate of 41 FPS. This sensor excels in delivering low noise performance with a readout noise of only 2.4 electrons and offers a dynamic range of 70.9 dB, making it ideal for demanding machine vision, medical imaging, and scientific applications.
With a high-speed USB 3.1 Gen1 interface providing 5 Gbit/s data transfer, the camera supports 8, 10, and 12-bit RAW pixel data output. Additional features include on-chip 2x2 downsampling and decimation for flexible image acquisition, hardware and software triggering, and versatile GPIO options. The compact 26.4 x 26.4 x 42 mm housing and lightweight 37.5-gram design make the MC089MG-SY suitable for embedded systems and space-constrained environments, while the standard C-mount lens interface offers broad compatibility.
Features:
- 8.9 MP Sony IMX255 CMOS sensor with 4112 x 2176 resolution
- Pregius™ global shutter technology for distortion-free imaging
- High frame rate of 41 FPS
- USB 3.1 Gen1 interface with 5 Gbit/s data transfer speed
- Supports 8, 10, and 12-bit RAW pixel output
- On-chip 2x2 downsampling and decimation modes
- Low readout noise of 2.4 electrons
- Dynamic range of 70.9 dB
- Compact size: 26.4 x 26.4 x 42.0 mm; lightweight at 37.5 g
- Standard C-mount lens interface with available CS, S-mount adapters
- Hardware and software trigger support
- Multiple GPIOs: 3 inputs, 3 outputs
- Bus powered via USB3 interface
- Operating temperature range: 0 - 50 °C
Applications:
- Machine vision and quality inspection systems
- Medical imaging, microscopy, and ophthalmology
- Scientific research and material analysis
- Robotics and factory automation
- Virtual reality (VR), augmented reality (AR), and motion capture
- UAV and drone-based aerial mapping and photogrammetry
- Broadcasting and high-speed event capture
- Portable industrial automation and embedded vision systems
- Low latency streaming for educational and presentation purposes
| Sensor vendor | SONY |
|---|---|
| Sensor model | IMX255 |
| Sensor technology | CMOS |
| Shutter type | Global shutter |
| Resolution | 8.9 MPix |
| Sensor resolution | 4112 x 2176 |
| Sensor size | 1" |
| Sensor active area | 14 x 7.5 mm |
| Sensor diagonal | 16.1 mm |
| Pixel size | 3.45 µm |
| Frame rate | 41 FPS |
| Bits | 8, 10, 12 bits |
| On-chip downsampling | 2x2 |
| On-chip decimation | 2x2 |
| Interface | USB3 |
| Data interface speed | 5 Gbit/s |
| Data connector type | USB3 Micro-B |
| GPIO count | Inputs: 3, Outputs: 3 |
| Exposure minimum | 1 µs |
| Exposure maximum | 30 s |
| Power consumption | 3.4 Watt |
| Heat dissipation | Natural convection, Optional Heatsink |
| Sensor cooling | No |
| Dynamic range | 70.9 dB |
| Full well Capacity | 9800 e- |
| Saturation Capacity | 10400.8 e- |
| Readout noise | 2.4 e- |
| Signal to noise ratio | 40.7 dB |
| Peak QE | 66% |
| Gain analog max | 24 dB |
| Spectral Range | 400 - 1000 nm |
| Lens mount | C-mount |
| Enclosure type | Standard housing |
| Physical dimensions (WHD) | 26.4 x 26.4 x 42.0 mm |
| Mass - weight | 37.5 gram |
| Ambient operating temperature | 0 - 50 °C |
| Storage Temperature | -25 - 60 °C |
