Watec WAT-660MDWB Dome Camera,1/4" format, 380 TVL, 3.8mm lens, Wall/Surface Mount (Discontinued)
SKU
Watec WAT-660MDWB
Quick Overview
*Product is Discontinued, Call For Replacement Options
WATEC WAT-660MDWB B/W CCTV Dome Camera,1/4" format, 380 TVL, 3.8mm lens, Wall/Surface Mount
The WATEC WAT-660MDWB is a FLUSH/SURFACE MOUNT DOME CAMERA with Blinded Housing w/ Slit Window & Yoke Lens Mount w/ Manual Pan/Tilt Settings.
Signal System | NTSC |
Pick-up element | 1/4 inch interline transfer CCD image sensor |
Number of total pixels | 537 (H) X 505 (V) (EIA) ; 537 (H) X 597 (V) (CCIR) |
Effective pixels | 510 (H) X 492 (V) (EIA) ; 500 (H) X 582 (V) (CCIR) |
| Unit cell size | 7.15μm (H) X 5.55μm (V) (EIA) ; 7.3μm (H) X 4.7μm (V) (EIA) |
| Scanning system | 2:1 interlace |
| Synchronizing system | Internal |
| Video output | Composite video, １Vp-p, 75ohm Unbalanced |
| Resolution(Horizontal) | 380TV lines (Glass f3.8mm, Center) |
| Minimum illumination | 0.08 lx. F2.0 (Glass f3.8mm) |
| Gamma Correction | γ≒0.45 |
| AGC | 5～32dB |
| S/N Ratio | 46dB (AGC OFF) |
| Electronic iris | 1/60 ～ 1/100,000 sec. (EIA), 1/50 ～ 1/100,000 sec. (CCIR) |
| Standard lens | Glass, f3.8mm, F2.0 |
| Connection Terminal | Video out, Power, GND |
| Power Supply | DC +9.0～9.9V |
| Current | max. 110mA |
| Operating temperature | -10℃ ～ +40℃ |
| Storage temperature | -30℃ ～ +70℃ |
| Dimensions | φ78.0×64.0 (H)mm |
| Weight | Approx. 115g |
| Accessories | Screw(M3.1×16)×3, Screw(M2.4×10)×3 |
