Watec WAT-240 VIVID P3.7 Color Pinhole Camera (Discontinued)
SKU
Watec WAT-240 VIVID P3.7
Quick Overview
WAT-240 VIVID P3.7 Color Pinhole Camera
*Product is discontinued, Replacement Option: WAT-240E
Fully adjustable bullet type camera. Select applicable setting and save them!
Signal System | NTSC |
Pick-up element | 1/4 inch interline transfer CCD image sensor |
Number of total pixels | 811(H)×507(V) |
Effective pixels | 768(H)×494(V) |
| Unit cell size | 4.9μm(H)×5.6μm(V)(NTSC) |
| Scanning system | 2:1 interlace |
| Synchronizing system | Internal |
| Video output | Composite video, １Vp-p, 75ohm Unbalanced |
| Resolution(Horizontal) | 450TV lines (Center) |
| Minimum illumination | 1.6 lx.(F2.0) |
| Gamma Correction | γ≒0.45 |
| AGC | 6～30dB |
| S/N Ratio | More than 50dB (AGC OFF, γ =1.0) |
| White balance | Automatic |
| Back light compensation | ON |
| Electronic iris | 1/60～1/100,000 sec.(EIA), 1/50～1/100,000 sec.(CCIR) |
| Standard lens | (Glass, f3.8mm, F2.0) or (Pin hole, f3.7mm, F4.5) |
| Power supply | DC+6V (DC+5.0 - +7.6V) |
| Current | 1.08W(typ) (=180mA) |
| Operating temperature | -10℃ ～ +40℃ |
| Storage temperature | -30℃ ～ +70℃ |
| Dimensions | 18(φ )×47.6(L)mm+lens |
| Weight | 28g (with Glass f3.8mm lens) |
| Accessories | Holder ring set |
