Watec WAT-100N EIA Hi-Res B/W Camera with Remote Controller, 1/2" CS Mount, 570 TVL (Discontinued)

SKU
Watec WAT-100N
Quick Overview

Watec WAT-100N Hi-Res B/W Camera with Remote Controller, 1/2" CS Mount, 570 TVL

*Product is discontinued, Call For Replacement Options

Watec WAT-100N - Great for the inter-plantery observationalist with Remote Cable Controlling (300cm in Length).

The Watec WAT-100N features High sensitivity, Near IR spectrum, Hand-held remote controller, Simultaneous output of composite video & Y/C signals, Shutter speed control (9 steps), Flickerless mode, AGC, Manual gain control, Gamma correction, Auto iris control, Iris level control

Signal System
NTSC
Pick-up element
1/2 inch Interline transfer CCD image sensor
Number of total pixels
811 (H) X 508 (V) (EIA) / 795 (H) X 596 (V) (CCIR)
Effective pixels
768 (H) X 494 (V) (EIA) / 752 (H) X 582 (V) (CCIR)
Unit cell size8.4μ m(H) X 9.8μ m(V)(EIA), 8.6μ m(H) X 8.3μm(V)(CCIR)
Scanning system2:1 interlace
Synchronizing systemInternal
Video outputComposite video, 1Vp-p, 75ohm Unbalanced
Resolution(Horizontal)570 TV lines
Minimum illumination0.001 lx. F1.4
Gamma Correctionγ≒1.0(OFF), 0.45, 0.65
AGC5~ 42dB
S/N Ratio50dB (AGC OFF)
Shutter SpeedsOFF, E:1/100(C:1/120), 1/250, 1/500, 1/1000, 1/2000,
1/5000, 1/10000, 1/100000 sec. (WAT-100NRM)
Lens MountCS-mount
Installation ScrewU 1/4 (D=5mm) (Top/Bottom)
Connection terminalVideo out(BNC), Power, Auto iris, Remote control(R.C.)
Power SupplyDC +10.8~ 13.2V(12V±10%)
Currentmax. 100mA
Operating temperature-10℃ ~ +40℃
Storage temperature-30℃ ~ +70℃
Dimensions42.0 (W) X 44.0 (H) X 53.0 (D)mm
WeightApprox. 125g
AccessoriesRemote control box(WAT-100NRM), DC-plug(WPDC12), Iris-plug(AIC), C-Mount adaptor(34CMA-R), Hex key wrench