Omron STC-SCS241POE 2.3MP GigE, Color Camera (Discontinued)
SKU
Sentech STC-SCS241POE
Quick Overview
*Product is Discontinued, Call For Replacement Options
Utilizing CMOS Global Shutter, the STC-SCS241POE is capable of capturing moving objects without any motion blur.
Sentech is releasing a brand new GigE Vision, 2.35 MP color GigE Vision camera. The STC-SCS241POE features 45 FPS, and a dazzling 2.35 MP resolution. Utilizing CMOS Global Shutter, the STC-SCS241POE is capable of capturing moving objects without any motion blur. By utilizing the GigE Vision interface, speed and power have never been easier to use.
Features:
Applications:
| Image Sensor | 1/1.2" 2.35 MP Color CMOS (SONY: IMX174) |
| Active Picture Element | 1920 (H) x 1200 (V) |
| Cell Size | 5.86 (H) x 5.86 (V) μm |
| Scanning System | Progressive |
| Scanning Mode | Full Scanning (Full resolution) / ROI |
| Frame Rate | 45 Hz at ful resolution; Maximum frame rate is 1628.29 Hz when ROI setting is 16 x 2 |
| ADC bit depth | 12 (W) x 12 (H) x 44 (D) mm |
| Video Output Format | 8/10/12 bit Raw, BayerGR8, BayerGR10, BayerGR10Packed, BayerGR12, BayerGR12Packed,RGB8Packed (Default:8bit Raw) |
| Noise Level | - |
| - @ 8 Bit Output | ≤ 1.3 Digit (Gain 0 dB) |
| - @ 10 Bit Output | ≤ 5.5 Digit (Gain 0 dB) |
| - @ 12 Bit Output | ≤ 22 Digit (Gain 0 dB) |
| Sensitivity | TBD |
| Minimum Scene Illumination | TBD |
| ALC | Auto shutter / Auto gain (AGC) / Manual (Default: Auto shutter OFF, AGC OFF) |
| Electronic Shutter | 30 useconds to 16,777,215 useconds |
| Gain | - |
| - Analog | 0 to 24 dB (Default: 0dB) |
| - Digital | 0 to 6 dB (Default: 0dB) |
| ROI | Horizontal: 16 to 1920 pixels / Vertical: 2 to 1200 pixels (Default: 1920 x 1200) Adjustable steps for the image size: 8 pixels in horizontal direction and 2 lines in vertical direction Adjustable steps for the offset: 8 pixels in horizontal direction and 2 lines in vertical direction |
| Gamma | Gamma 1.0 (Factory default) or uploadable gamma table |
| Binning Function | Not supported |
| Decimation Function | Individual x2 Horizontal, Vertical Decimation |
| Mirror Image | Horizontal / Vertical / Horizontal and Vertical (Default: OFF) |
| ROI Function | Variable AOI setting via the communication |
| White Balance | Auto / Manual / One-shot (Default: Manual) |
| Operational Mode | Free-run / Edge-Preset Trigger / Pulse Width Trigger (Default: Free-run) |
| Interface | IEEE802.3af CLASS2 (1000BASE-T) |
| Protocol | GigE Vision® 1.2 and GenICam™ Standard Version 2.1 (SFNC 1.4) |
| I/O | One opt-isolated input and two open collector outputs |
| Communication | UART Communication through Ethernet port |
| Power | - |
| - Input Voltage | + 10.8 ~ 26.4 Vdc |
| - Consumption | TBD (+12V: 3.0W, +24V: 3.6W, PoE: 3.0W) |
| Dimensions | 35 (W) x 35 (H) x 53.4 (D) mm (excluding connectors) |
| Optical Filter | - |
| Optical Center Accuracy | Positional Accuracy in H and V directions: +/- 0.3 mm, Rotational accuracy of H and V: +/- 1.5 deg. |
| Material | Aluminum Alloy (AC) |
| Lens Mount | C-Mount |
| Connectors | RJ45 connector, Power- I/O connector: HR10A-10R-6PB (Hirose) or equivalent |
| Camera Mount Screws | Two 1/4'' Tripod screw holes (one on each top and bottom plate) ; Sixteen M4 screw holes (Four on each top, bottom and both side plate) |
| Weight | Approx. 100g |
| Operating Temperature | - |
| - Minimum | Environmental Temperature: -5°C |
| - Maximum | Camera housing temperature (top plate) shall not exceed 60°C, (This corresponds to an environmental temperature of approximately 43°C) |
| Storage Temperature | Environmental Temperature: -20°C to 65°C |
| Storage Humidity | < 85% |
| Vibration | 20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each |
| Shock | Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each |
| Standard Compliancy | EMS: EN61000-6-2, EMI: EN55011 |
| RoHS | RoHS Compliant |
