Omron STC-SC152POEHS 1.4MP GigE, Color Camera (CCD Sensor: ICX267AK) (Discontinued)

SKU
STC-SC152POEHS
Quick Overview

1360 pixels x 1040 pixels, 1/2" PS IT CCD, 34 fps, Power over Ethernet High Speed Gigabit Ethernet Camera. Available in Color (CCD Sensor: ICX267AK)

*Product is discontinued, Replacement Option: STC-MCS163POE

The STC-SC152POEHS is part of Omron/Sentech's Brand New Power over Ethernet High Speed GigE camera series. It features a 1/2" color SXGA sensor, 34fps and communication over a 6 pin Hirose or Ethernet connector. The STCSC152POEHS boasts a compact 35(w) x 35(H) x 55.9 (D) mm size, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam™, and is compatible with all standard industry drivers. The GigE PoEHS series is available now at an extremely low cost.

Features:

  • User Programmable AOI
  • High Speed Power Over Ethernet
  • 1.3 Megapixel Resolution with 34 fps
STC-SC152POEHS Specifications
Imager1/2” interline SXGA color progressive CCD: ICX267AK
Total Picture Element1434 (H) x 1050 (V)
Active Picture ElementSXGA: 1360 (H) x 1040 (V)
Chip Size7.6 (H) x 6.2 (V) mm
Cell Size4.65 (H) x 4.65 (V) um
Scanning SystemProgressive
Vertical Frequency34.23358 Hz at full resolution; 0.55789 to 139.93433 Hz changeable via the communication; Maximum frame rate is dependent on the AOI setting; Maximum frame rate of the camera (139.93433 Hz) is 104 vertical resolution AOI setting.
Horizontal Frequency34.0860 Hz
Pixel Frequency65.453333 MHz
Noise Level
@ 8bit output
<= 3 Digit (Gain 0 dB)
@ 10bit output
<= 12 Digit (Gain 0 dB)
@ 12bit output
<= 48 Digit (gain 0 dB)
Minimum Scene Illumination16.3 Lux at F1.2, 34.23358 Hz
Sync SystemInternal
Video OutputDigital 8 ,10 or 12 bit Raw Data or RGB 8 bit
InterfacePoE: IEEE802.3af CLASS3 (1000BASE-T)
ProtocolGigE Vision 1.2 and GeniCam 2.0 compliant
Exposure TimePreset continuous mode: 10 seconds to 16,777,216 seconds; Preset trigger mode: 10 seconds to 16,777,216 seconds; Pulse width mode: 10 seconds to Unlimited.
ALCElectronic iris and AGC (ON/OFF)
Gain0 to 18.309 dB
GammaGamma 1.0 (Factory default) or downloadable gamma table
AOI FunctionProgrammable AOI setting via the communication
Smear ReductionSelectable ON/OFF via the communication
Color InterpolationAvailable on RGB output
White Balance FunctionAuto, Manual, and push to set white balance is available on both Raw Data output and RGB output.
Operation ModeEdge preset trigger, pulse width trigger (unlimited exposure time)
CommunicationUART communication through Ethernet Port
I/OsOne opt isolated input and two open collector outputs
Power
Input Voltage
+10.8 to +26.4Vdc through power/IO connector or Power Over Ethernet; (Auto detection with power/IO connector prioritized)
Consumption
12V: 3.5W / 3.2W, PoE: 3.7W / 3.5W
Dimensions35 (W) x 35 (H) x 57.3 (D) mm excluding connectors
Optical FilterIR cut filter on
Optical Center AccuracyPositional accuracy in H and V directions: +/- 0.3 mm; Rotational accuracy of H and V: +/- 1.5 deg.
MaterialAluminum (AC)
Lens MountC Mount
ConnectorsRJ45 connector; Power/IO connector: HR10A-10R-6PB (Hirose) or equivalent
Camera Mount ScrewsTwo ¼” Tripod screw holes (one each on top and bottom plate); Twelve M4 screw holes (four each on top, bottom, and two each on both side plates)
WeightApprox. 130
Operating Temperature
Minimum
Environmental Temperature: -5 deg. C
Maximum
Environmental Temperature: 35 deg. C or camera housing temperature (Top Plate) : 65 deg. C
Storage TemperatureEnvironmental Temperature: -30 to 65 deg. C
Vibration20Hz to 200Hz to 20Hz (5min/cycle), acceleration 10G, 3 directions 30 min. each
ShockAcceleration 38G, half amplitude 6ms, 3 directions, 3 times each
Standard CompliancyEMS: EN61000-6-2, EMI: EN55011
RoHSRoHS compliant