Omron STC-SC133POEHS 1.3MP Color GigE Camera (Discontinued)

SKU
STC-SC133POEHS
Quick Overview

1280 pixels x 966 pixels, 1/3" PS IT CCD, 39 fps, Power over Ethernet High Speed Gigabit Ethernet Camera. Available in Color (CCD Sensor: ICX445AQ)

*Product is discontinued, Replacement Option: STC-MCS163POE

The STC-SC133POEHS is part of Sentech's Brand New Power over Ethernet High Speed GigE camera series. It features a 1/3" color SXVGA sensor, 39fps and communication over a 6 pin Hirose or Ethernet connector. The STC-SC133POEHS boasts a compact 35(w) x 35(H) x 55.9 (D) mm size, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam™, and is compatible with all standard industry drivers. The GigE PoEHS series is available now at an extremely low cost.

Features:

  • User Programmable AOI
  • High Speed Power Over Ethernett
  • 1.2 Megapixel Resolution with 39 fps

 

STC-SC133POEHS Specifications
Imager1/3” interline SXVGA color progressive CCD: ICX445AQ
Total Picture Element1348 (H) x 976 (V)
Active Picture ElementSXVGA: 1280 (H) x 966 (V)
Chip Size6.26 (H) x 5.01 (V) mm
Cell Size3.75 (H) x 3.75 (V) um
Scanning SystemProgressive
Vertical Frequency39.82294 Hz at full resolution; 0.60158 to 159.614229 Hz changeable via the communication; Maximum frame rate is dependent on the AOI setting; Maximum frame rate of the camera (159.614229 Hz) is 104 vertical resolution AOI setting.
Horizontal Frequency39.4247 Hz
Pixel Frequency65.453333 MHz
Noise Level
@ 8bit output
<= 3 Digit (Gain 0 dB)
@ 10bit output
<= 12 Digit (Gain 0 dB)
@ 12bit output
<= 48 Digit (gain 0 dB)
Minimum Scene Illumination11.8 Lux at F1.2, 39.82294 Hz
Sync SystemInternal
Video OutputDigital 8 ,10 or 12 bit Raw Data or RGB 8 bit
InterfacePoE: IEEE802.3af CLASS3 (1000BASE-T)
ProtocolGigE Vision 1.2 and GeniCam 2.0 compliant
Exposure TimePreset continuous mode: 10 seconds to 16,777,216 seconds; Preset trigger mode: 10 seconds to 16,777,216 seconds; Pulse width mode: 10 seconds to Unlimited.
ALCElectronic iris and AGC (ON/OFF)
Gain0 to 18.309 dB
GammaGamma 1.0 (Factory default) or downloadable gamma table
AOI FunctionProgrammable AOI setting via the communication
Smear ReductionSelectable ON/OFF via the communication
Color InterpolationAvailable on RGB output
White Balance FunctionAuto, Manual, and push to set white balance is available on both Raw Data output and RGB output.
Operation ModeEdge preset trigger, pulse width trigger (unlimited exposure time)
CommunicationUART communication through Ethernet Port
I/OsOne opt isolated input and two open collector outputs
Power
Input Voltage
+10.8 to +26.4Vdc through power/IO connector or Power Over Ethernet; (Auto detection with power/IO connector prioritized)
Consumption
12V: 3.0W / 2.8W, PoE: 3.3W / 3.1W
Dimensions35 (W) x 35 (H) x 57.3 (D) mm excluding connectors
Optical FilterIR cut filter on
Optical Center AccuracyPositional accuracy in H and V directions: +/- 0.3 mm; Rotational accuracy of H and V: +/- 1.5 deg.
MaterialAluminum (AC)
Lens MountC Mount
ConnectorsRJ45 connector; Power/IO connector: HR10A-10R-6PB (Hirose) or equivalent
Camera Mount ScrewsTwo ¼” Tripod screw holes (one each on top and bottom plate); Twelve M4 screw holes (four each on top, bottom, and two each on both side plates)
WeightApprox. 130
Operating Temperature
Minimum
Environmental Temperature: -5 deg. C
Maximum
Environmental Temperature: 35 deg. C or camera housing temperature (Top Plate) : 65 deg. C
Storage TemperatureEnvironmental Temperature: -30 to 65 deg. C
Vibration20Hz to 200Hz to 20Hz (5min/cycle), acceleration 10G, 3 directions 30 min. each
ShockAcceleration 38G, half amplitude 6ms, 3 directions, 3 times each
Standard CompliancyEMS: EN61000-6-2, EMI: EN55011
RoHSRoHS compliant