Hitachi KP-F39 PCL Monochrome

SKU
KP-F39 PCL Monochrome
Quick Overview
PoCL (Power over Camera Link) Camera

The PoCL version is connected by a single (PoCL) Mini Camera Link cable directly to a frame grabber supporting PoCL. Simple systems construction is possible.

  • High Resolution & High Speed
    High resolution combined with high frame rates are possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications.
  • Frame Shutter
    Higher resolution in the vertical directional is ensured for moving object.
  • Multi-step Shutter
    Provided multi-step shutter or variable shutter (minimum 1/100,000 second) .
  • Frame on Demand
    The trigger and the shutter can be used to capture an image at the desired timing and the accumulation time.
  • Remote Control
    Through the Camera Link interface, various setting such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
  • Imager1/3-inch interline CCD
    Total pixels692 (H) x 504(V)
    Effective pixels659 (H) x 494(V)
    Active pixels659 (H) x 494(V)
    Pixel size7.4 (H) x 7.4 (V) um (square lattice)
    Sensing area4.88 (H) x 3.66 (V) mm
    Scanning systemProgressive
    Aspect ratio4:3
    Frame rate91 frames/second
    Scanning frequencyHorizontal: 46.875 kHz
    Vertical: 91.73 Hz
    Sync systemInternal
    Lens mountC mount (Flange focal distance=17.526 mm)
    Video outputDigital output Camera Link
    Clk = 36 MHz
    ResolutionHorizontal: 500 TV line
    Vertical: 490 TV lines
    Sensitivity400 lx, F4, 3200 K
    Minimum illumination7.4 lx, F1.4, MAX GAIN,
    without IR cut filter
    Signal noise to ratio50 dB
    Electronic shutter speed1/91, 1/250, 1/500, 1/1000,1/2000, 1/4000, 1/10000, 1/50000 second.
    Factory setting is off (1/60 second)
    or changeable by variable shutter (Minimum 1/100000 second)
    Gamma compensationy = 1
    Frame on demandFixed shutter, one trigger and VD reset (Factory setting is all off)
    Partial scanSelectable start position and width of picture grabbing in 1H step.
    Ambient temperatureOperating: 0 to + 40°C (+32 to +104ºF), less than 90 % RH
    Storage: -10 to + 50°C (+14 to +122ºF), less than 70 % RH
    Power supply12 ±1 VDC
    Current consumptionApprox. 160 mA (Approx. 2.0 W)
    External dimensions29 (W) x 29 (H) x 29 (D) mm
    MassApprox. 50 g