Bitflow AON-PC2-CXP1 frame grabber is small, powerful and fast!

While it may be tiny, it moves high speed serial data quickly! The Bitflow AON-PC2-CXP1 can capture video at speeds of up to a speedy 6.25 Gigabits/Second (Gb/S). At the same time, instructions can be sent to a camera 20 Mb/S (with a trigger accuracy of +/- 2 nanoseconds). Impressively, this all takes place over one section of industry standard 75 Ohm coaxial cable. With the ability to group many CXP links, advanced data rates can be maintained (e.g. four links provide 25 Gb/S of data). A small foot print single link CXP camera joined with the Aon-CXP can provide all the usefulness of a GigE Vision or USB3 Vision camera system. [caption id="attachment_7721" align="alignright" width="300"]BitFlow AON-PC2-CXP1 Camera Link Frame Grabber BitFlow AON-PC2-CXP1 Camera Link Frame Grabber[/caption] AON-CXP is swiftly gaining recognition as a cost-effective CoaXPress frame grabber. Frame grabbers inherently are electronic mechanisms that “grab” separate, digital still frames from an analog video signal or a digital video stream. As part of a computer vision system, the frame grabber catches video frames in digital configuration and then displays, stores or transmits them.

Features abound!

The Bitflow AON-PC2-CXP1 camera link frame grabber has impressively extensive features! Briefly, it is CoaXPress 1.1 compliant, and can support 1.0 and 1.1. cameras, as well as one CXP-6 camera, delivering power for a camera (up to 13 Watts per link). This frame grabber has the ability to provide safe power, and full protection from all power line faults. Loves Plug and Play cameras with automatic link speed detection, and will support cable lengths of up to 135 meters. Likes PCI Express x2 Gen 2.0 interface, and is perfectly matched with PCI Express Gen 1.0 slots. While half-height and half-size x2 of PCI Gen 2.0 Express Board, it boasts an available half height bracket, with an I/O connector on the bracket. Utilizing its FlowThru technology, means there is not a need for an on-board memory. And, there is not a frame rate limit! The Bitflow AON-PC2-CXP1 frame grabber utilizes a StreamSync acquisition engine to optimize synchronization between acquisition and DMA (Direct Memory Access). With the StreamSync buffer manager, DMA channel efficiency is increased.  This frame grabber is able to obtain variable length frames from line scan cameras and image sequences in excess of the 4GB level. While BitFlow has a long history of frame grabber production, the Aon is just about the easiest and most affordable CoaXPress frame grabber that can be manufactured. It can be supported on both 32-bit and 64-bit platforms, and has full Gen1Cam support for control and capture. One of the largest benefits of utilizing a frame grabber over a GigE Vision or USB3 Vision camera, is that all of the hardware and software components of the capture system are obtained from one manufacturer. Aegis Electronic Group, Inc. has these state-of the art, affordable Bitflow AON-PC2-CXP1 frame grabbers immediately available.  Contact them for fast, reliable service,  and their technological-savvy personnel will assist you with all your frame grabber needs! Aegis provides the ultimate in product, assistance and follow-up!