Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Z3 Technology FV2K-15A (FV2K15A) Lightweight Dual Camera Full HD Encoder
SKU
FV2K-15A
The FV2K-15A is designed for dual camera UAV, inspection, surveillance, industrial and UAV applications. The flexibility of the system allows for a visible camera and an infrared or night vision camera. The hardware consists of a small 2-board set: Input, Encoder and Connector PCB. The system is capable of encoding multiple channels of H.265 and H.264 video in HD resolutions. The Input board features flexible digital and analog input ports. The encoder can be configured to stream over IP and simultaneously record to micro SD card. This compact design only uses 4.5 watts of power when streaming from 2 cameras. The FV2K-15A is preloaded with software for full functionality out-of-the-box.
Features:
- Interfaces with LVDS and Composite cameras
- Dual LVDS Camera Input or LVDS and a Composite Input
- High Quality Low Latency Encoding
- Transport Camera Control Commands over IP
- ONVIF Profile S & T Compliant
- Lightweight for UAV & other weight constrained Applications
Applications:
- UAV and Drones
- Inspection
- Safety and Surveillance
- Industrial
- Customized Applications
| Visible Camera Formats | Sony FCB-EV7520 (A), FCB-EV9500L, LVDS |
| HD and SD IR Formats | LDVS |
| Recording | To Micro SD |
| Additional Interfaces | 100 Mbps Ethernet, Micro-HDMI Passthrough, Composite Output, LVTTL UART x 2 , GPIO x 2, Micro-SD card |
| Video Codecs | H.265, H.264, MJPEG |
| Encoding Resolutions | 1080p (up to 60fps), 720p, NTSC/PAL, VGA, CIF and QVGA |
| Output Formats | RTP, RTSP, MPEG-2 TS, RTMP, TS-RTP, MP4, and TS-file |
| Features | • Lightweight, Low Latency, Low Power • Ability to Resize HD Camera Input to Lower Resolutions Keeping Full Field of View •SRT Modes Supported: Caller, Sender, Rendezvous & SRT Encryption • Pass Visca Camera Control Commands over IP • Easy-to-Use HTTP-Based Control Interface • ONVIF® Profile S & T* • Compatible with ZEUS® DMD-4K Video Decoder |
| Encoder Board Size | 75 x 50 x 33mm (2.95 x 1.97 x 1.30 in) |
| Encoder Board Weight | 61g (aluminum heat pipe is additional 42g) |
| Power Consumption | 12V Power, Typical power consumption is 4.5w while encoding 2 cameras with H.265 video at 1080p30 |
