Ximea MC245CG-SY-HDR 24.5MP Color USB3 Industrial Camera with Sony IMX530 CMOS Global Shutter Sensor, 15 FPS, 26.4 x 26.4 x 42.0 mm
The Ximea MC245CG-SY-HDR is a high-performance industrial camera equipped with a 24.5 MP Sony IMX530 CMOS sensor featuring global shutter technology. This 1.2-inch sensor delivers a resolution of 5328 x 4608 pixels with 2.74 µm pixel size, ensuring sharp, distortion-free images at up to 15 frames per second. The camera outputs 8 to 12-bit RAW data through a high-speed USB 3.1 interface capable of 5 Gbit/s data transfer, perfect for demanding machine vision and industrial inspection applications requiring precision and speed.
Designed for compactness and versatility, the MC245CG-SY-HDR measures only 26.4 x 26.4 x 42 mm and offers a standard C-mount lens interface, with optional adapters available. It features dual ADCs and backside illumination for enhanced image quality, a dynamic range of 70.2 dB, and a low readout noise of 2.3 electrons. Programmable via SDKs in C++, C#, and Python, it supports hardware and software triggers, multiple GPIOs, and various image processing controls, making it ideal for medical imaging, aerial mapping, augmented reality, and quality inspection.
Features:
- 24.5 Megapixel Sony IMX530 CMOS sensor with global shutter
- 5328 x 4608 resolution, 1.2" sensor size, 2.74 µm pixel pitch
- USB 3.1 interface with 5 Gbit/s data transfer speed
- Frame rate up to 15 FPS at full resolution
- 8, 10, 12-bit RAW pixel output, dual ADC
- Compact dimensions: 26.4 x 26.4 x 42 mm, lightweight 37.5 g
- Standard C-mount lens interface, optional CS/S-mount adapters
- Dynamic range 70.2 dB, low read noise 2.3 electrons
- Backside illumination for enhanced sensitivity
- Hardware and software trigger support, multiple GPIOs
- Programmable SDK support for C++, C#, Python
- Operating temperature 0–50°C, IP40 rating
- Ideal for machine vision, medical imaging, aerial mapping, AR, quality inspection
Applications:
- Industrial machine vision and factory automation
- High-resolution quality inspection and metrology
- Medical imaging and microscopy
- Aerial mapping and UAV photogrammetry
- Augmented reality (AR) and virtual reality (VR) capture
- Broadcast slow-motion and motion capture
- Robotic guidance and precision assembly
- Security and surveillance systems
| Resolution | 24.5 MPix |
| Sensor resolution | 5328 x 4608 |
| Sensor vendor | SONY |
| Sensor model | IMX530 |
| Sensor type | Color |
| Sensor technology | CMOS |
| Sensor size | 1.2" |
| Sensor active area | 14 x 12 mm |
| Sensor diagonal | 19.3 mm |
| Pixel size | 2.74 µm |
| Shutter type | Global shutter |
| Frame rate | 15 FPS |
| Bits | 8, 10, 12, 2 x 8, 2 x 10, 2 x 12 bits |
| On-chip decimation | 2x2 |
| Interface | USB3 |
| Data interface speed | 5 Gbit/s |
| Data connector type | USB3 Micro-B |
| GPIO count | Inputs: 3, Outputs: 3 |
| Exposure minimum | 17 µs |
| Exposure maximum | 30 s |
| Power consumption | 3.4 Watt |
| Heat dissipation | Natural convection, Optional Heatsink |
| Sensor cooling | No |
| Special features | Dual ADC, Backside illumination |
| Dynamic range | 70.2 dB |
| Full well Capacity | 10000 e- |
| Saturation Capacity | 9273.4 e- |
| Readout noise | 2.3 e- |
| Signal to noise ratio | 40.1 dB |
| Peak QE red | 45% 600nm |
| Peak QE green | 59% 530nm |
| Peak QE blue | 51% 450nm |
| Gain analog max | 24 dB |
| Spectral Range | 400 - 1000 nm |
| Lens mount | C-mount |
| Enclosure type | Standard housing |
| Physical dimensions (WHD) | 26.4 x 26.4 x 42.0 mm |
| Mass - weight | 37.5 gram |
| Ambient operating temperature | 0 - 50 °C |
| Storage Temperature | -25 - 60 °C |
