Omron STC-SBE132POE 1.3MP GigE, Monochrome Camera With CMOS Sensor: EV76C560ACT-EQV (Discontinued)
*Product is Discontinued, Call For Replacement Options
The STC-SBE132POE is part of Omron's Brand New Power over Ethernet GigE cameras, featuring an eV2 CMOS Sensor. It features a 1/1.8" monochrome SXVGA sensor, 61 fps and communication over a 6 pin Hirose or Ethernet connector (CMOS Sensor: EV76C560ACT-EQV)
The STC-SCE132POE boasts a compact 35(w) x 35(H) x 54.3 (D) mm size. This camera meets all industry standards for GigE Vision® and GenICam™, and is compatible with all standard industry drivers. The GigE PoE series is available now at an extremely low cost.
Features:
- 1.1/8" e2v CMOS Sensor
- SXVGA: 1280 (H) x 1024 (V)
- 1.2 GenICam 1.4 Compliant
Applications:
- Industrial Applications
- Medical Applications
- Factory Automation
- Industrial Inspection
Imaging
Model No | STC-SCE132POE |
Image Sensor | 1/1.8" 1.3MP Color CMOS (e2V: EV76C560ACT-EQV) |
Active Picture Element | 1280 (H) x 1024 (V) |
Cell Size | 5.3 (H) x 5.3 (V) µm |
Function
Scanning System | Full scanning, Variable ROI |
Shutter Type | Global Shutter |
Scan Mode | Full Scan / AOI |
Vertical Frequency (Frame Rate) | SXVGA: 1280 (H) x 1024 (V): 61 FPS |
Video Output | Mono8, Mono10, Mono10Packed, BayerRGB8, BayerRGB10, BayerRGB10Packed, RGB8Packed |
- Noise Level: @ 10 bit output | <= 12 Digit (Gain 0 dB) |
Minimum Scene Illumination | TBD Lux @ F1.2 |
ALC | AE and AGC (ON/OFF) |
Exposure Time | Preset continuous mode: 10 useconds to 1,000,719 useconds Preset trigger mode: 10 useconds to 1,000,719 useconds |
Gain | - |
- Analog (Gain) | 0 ~ 5.952 dB |
- Digital (Gain) | 0 ~ 6 dB |
Gamma | Gamma 1.0 (Factory default) or uploadable gamma table (Default:1) |
AOI Function | AOI (H: 32 to 1280 Pixel / V: 32 to 1024 Line） Unit： H 8 Pixel / V 2 Line |
Binning | H: 1/2, V: 1/2 |
Decimation(Skipping) | Horizontal 1/2, 1/4, Vertical 1/2, 1/4 |
Flip Image | Horizontal |
Pixel Blemish Correction | Maximum 64 points (Default:ON) |
White Balance | Auto, Manual, Push to Set, White Balance are available, on both raw data and RGB outputs (Default:OFF) |
Operating Mode | Free Run, Edge preset trigger, Trigger Width (Pulse width) (Default:OFF) |
Protocol | IEEE802.3 (1000BASE-T) |
Communication | GigE Vision® 1.2 and GenICam™ 1.4 Compliant |
I/Os | One opt-isolated input and two open collector outputs(+3.3V) |
Power | - |
- Input Voltage | +10.8 to +26.4 Vdc (IO Connector) or Power Over Ethernet(IEEE802.3af compliance) |
- Consumption | Less than TBD W |
Mechanical
Dimensions | - |
- C-Mount Color: | 35 (W) x 35 (H) x 54.3(D) mm excluding connectors |
- CS-Mount Color: | 35 (W) x 35 (H) x 49.3(D) mm excluding connectors |
Optical Filter | With IR Cut Filter |
Optical Center Accuracy | Positional accuracy in H and V directions:: ±0.3 mm, Rotational accuracy of H and V: ±1.0 deg |
Material | Aluminum (AC) |
Lens Mount | C-Mount, CS-Mount |
Connectors | RJ45 connector, Power- I/O connector: HR10A-10R-6PB (Hirose) or equivalent |
Camera Mount Screws | Two 1/4'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate) |
Weight | Approx. 100g |
Environmental
Operating Temperature | - |
- Minimum | Environmental Temperature: -5°C |
- Maximum | Camera housing temperature (top plate) shall not exceed 40°C, (This corresponds to an environmental temperature of approximately 62°C) |
Storage Temperature | Environmental Temperature -30 ~ 65°C |
Vibration | 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each |
Shock | Acceleration: 38G, half amplitude 6 ms, 3 times, XYZ each direction |
Standard Compliancy | EMS: EN61000-6-2, EMI: EN55011 |
RoHS | RoHS Compliant |
