Omron STC-MCS312U3V USB 3.0 Color Area Scan Camera, 3.2 MP, Sony IMX265, C-Mount, 56 fps Global Shutter
*Please note tariff fee is included in price*
3.2 MP USB 3.0 color area scan camera with Sony IMX265 CMOS sensor, global shutter, 1/1.8" format, and C‑mount, delivering up to 56 fps for high‑performance machine vision and automation tasks.
NDAA CompliantThe STC-MCS312U3V is a 3.2 MP USB 3.0 color area scan camera built around the Sony IMX265 CMOS sensor, offering a 2048 x 1536 resolution with a 1/1.8" optical format and 3.45 µm pixels for excellent detail and low noise. With a global shutter, C‑mount lens interface, and up to 56 fps frame rate, this camera delivers stable, blur‑free imaging for demanding industrial and scientific applications.
Engineered for machine vision and automation, the STC-MCS312U3V connects via USB 3.0 for high‑bandwidth image transfer and simple integration with modern PCs and embedded systems. Its area scan architecture, flexible triggering support (per datasheet), and robust cased housing make it suitable for applications such as inspection, alignment, measurement, and general‑purpose factory imaging where consistent performance and integration flexibility are essential.
Features:
- 3.2 MP Sony IMX265 CMOS Sensor
- Global Shutter for motion artifact-free imaging
- 56 fps at full resolution (8/10/12-bit output)
- USB 3.0 Interface (USB3 Vision® and GenICam compliant)
- ROI and Gamma Control for image customization
- Compact Design: 28 x 28 x 40 mm, 48g
- C-Mount Lens with IR Cut Filter
- Auto Exposure, Gain, and White Balance
Applications:
- Machine inspection
- Robotics guidance
- Alignment control
- PCB inspection
- Metrology imaging
- Packaging verification
| Image Sensor | 1/1.8” 3.2M color progressive CMOS (Sony: IMX265) |
| Shutter Type | Global |
| Active Picture Element | 2048 (H) x 1536 (V) |
| Cell Size | 3.45 (H) x 3.45 (V) µm |
| Sync System | Free run, External trigger(Hardware, Software) |
| Maximum Frame Rate (Full Scan) | - |
| -8Bit Output | 56.0 fps |
| -10Bit Output | 56.0 fps |
| -10bit Packed Output | 56.0 fps |
| -12Bit Output | 56.0 fps |
| -12bit Packed Output | 56.0 fps |
| ADC bit width | 12 bit |
| Video Format | 8/10/12 bit output (Support packed on 10bit, 12bit) |
| Noise Level | - |
| -8Bit Output | 25.2μseconds to 47 second |
| -10Bit Output | 25.2μseconds to 47 second |
| -10bit / 10bit Packed Output | 25.2μseconds to 47 second |
| -12bit Packed Output | 25.2μseconds to 47 second |
| -12bit Packed Output | 25.2μseconds to 47 seconds |
| Gain | -40dB to 12dB |
| -Analog (Gain) | 0 to 20.8 dB |
| -Digital (Gain) | 0 to 6 dB |
| Black Level | - |
| -8Bit Output | 0 to 31 |
| -10bit /10bit Packed Output | 0 to 127 |
| -12bit / 12bit Packed Output | 0 to 511 |
| White Balance Gain | -40dB to 12dB |
| ROI (AOI) | Horizontal: 64 to 2448 (2432 on Packed) / Vertical: 32 to 2048 Adjustable Steps for offset: 16 pixels in horizontal direction (64 pixels on Packed) / 4 lines in vertical direction Adjustable Steps for offset: 4 pixels in horizontal direction / 4 lines in vertical direction |
| Gamma | Gamma Table =0.1 to 4.0, Default = 1.0 |
| Binning | N/A |
| Decimation | Individual x2 Horizontal, Vertical Decimation |
| Image Flip | Horizontal / Vertical / Horizontal and Vertical / OFF |
| Pixel Defect Correction | Up to 64 points |
| Auto Image Control | - |
| -Auto Exposure | Support (Default: Fix 27.5 mseconds) |
| -Auto Gain | Support (Default: Fix x1) |
| -Auto White Blance | Support (Default: Manual) |
| Operational Mode | Free-run / Edge-preset Trigger / Pulse width Trigger / Start Stop Trigger |
| User Setting Storage | Support |
| Communication | Via USB3.0 bus |
| Interface | USB 3.0 Super Speed (USB 3.0 Micro B) |
| Protocol | USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant and Sentech’s unique protocol (on Normal SDK, Trigger SDK) |
| Input/Output | Three GPIO, One Camera Hardware Reset |
| Power | - |
| -Input Voltage | +5V(typ.) (This conforms to the USB standard) |
| -Consumption | Max: 3.4W, Typ: 2.8W |
| Operational Mode | Free-run / Edge preset trigger / Pulse width trigger / Start and Stop trigger |
| User Setting Storage | Support |
| Communication | Via USB3.0 bus |
| Interface | USB 3.0 Super Speed (USB 3.0 Micro B) |
| Protocol | USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant and Sentech’s unique protocol (on Normal SDK, Trigger SDK) |
| Input/Output | Three GPIO, One Camera Hardware Reset |
| Power | - |
| -Input Voltage | +5V(typ.) (This conforms to the USB standard) |
| -Consumption | Max: 3.4W, Typ: 2.8W |
| Dimensions | C Mount: 28 (W) x 28 (H) x 40 (D) mm (*1) |
| Optical Filter | IR cut filter |
| Optical Center Accuracy | Positional Accuracy in H and V directions: +/- 0.3 mm, Rotational accuracy of H and V: +/- 1.5 deg. |
| Material | Aluminum Alloy |
| Lens Mount | C-Mount |
| Interface Connector | USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent |
| Weight | Approx. 48g |
