Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group


Pleora iPORT CL-GigEB-IND 900-6010 Angled View

Pleora iPORT CL-GigEB-IND (900-6010) External Frame Grabbers In Mountable Enclosure

Pleora iPORT CL-GigEB-IND 900-6011 Dev Kit Angled View

Pleora iPORT CL-GigEB-IND (900-6011) External Frame Grabbers With Development Kit

Pleora iPORT CL-GigEB-IND (900-6009) External Frame Grabbers Without Mountable Enclosure

Transform Camera Link Base cameras into GigE Vision effortlessly with Pleora's iPORT CL-GigEB-IND External Frame Grabbers. Experience low latency, extended temperature range, and seamless integration with various computing platforms. Elevate your industrial vision with Pleora.
iPORT CL-GigEB-IND 900-6009

Revolutionize Industrial Vision with Pleora iPORT CL-GigEB-IND External Frame Grabbers

Pleora's iPORT™ CL-GigEB-IND External Frame Grabbers redefine industrial vision by seamlessly integrating Camera Link Base configuration cameras into GigE Vision systems. Operating in extreme temperatures from -40°C to +60°C, these frame grabbers offer a transformative solution for diverse applications.

With these external frame grabbers, Camera Link cameras can enjoy the advantages of Gigabit Ethernet (GigE) in terms of long-distance cabling, computing platform support, and networking. The CL-GigEB-IND converts video data from Camera Link cameras to packets and transmits it over GigE with low, predictable latency. Cabling distances can be up to 100 meters using standard CAT5e/6 cabling, and unlimited with off-the-shelf Ethernet switches.

The connection at the computing platform is a standard GigE port, allowing designers to reduce system size, cost, and power consumption by using smaller form factor computing platforms such as laptops, embedded PCs, and single-board computers.

The iPORT CL-GigEB-IND is supported by Pleora’s feature-rich eBUS™ SDK application toolkit, facilitating rapid prototyping and deployment of production-ready software. Designers can support video transmission over GigE, 10 GigE, and USB 3.0 using the same application programming interface (API).

The frame grabbers boast features such as low latency transmission, an extended operating temperature range of -40°C to +60°C, and Power over Camera Link (PoCL). The compact design, coupled with low power consumption, allows integration into various computing platforms. The IEEE 1588 Precision Time Protocol capabilities enable precise control, trigger, and synchronization of equipment and multiple cameras, while the GPIO minimizes the effects of electrical noise.

Incorporating a programmable logic controller (PLC), users can precisely measure, synchronize, trigger, and control other vision system elements. The iPORT CL-GigEB-IND also supports GenICam integration, making it fast and easy to create a user-friendly GenICam interface.

Elevate your industrial vision with Pleora's iPORT CL-GigEB-IND External Frame Grabbers, unlocking new possibilities for applications such as industrial automation, quality control, robotics, medical imaging, and more. Experience the future of machine vision with advanced connectivity, enhanced performance, and seamless integration.


  • Low latency transmission over GigE
  • Extended operating temperature range: -40°C to +60°C
  • Compatibility with various computing platforms
  • Compact design with low power consumption
  • Power over Camera Link (PoCL) support
  • IEEE 1588 Precision Time Protocol capabilities
  • Record and playback functionality
  • Programmable logic controller (PLC) for precise control
  • Supported by Pleora's eBUS™ SDK for rapid deployment


  • Industrial automation
  • Quality control
  • Robotics
  • Manufacturing inspection
  • Medical imaging
  • Traffic monitoring
  • Surveillance systems
  • Research and development
  • Agricultural imaging
  • 3D imaging applications

Network Video Connectivity Solutions

IPORT External Frame Grabber

  • Purpose-built hardware compatible with Camera Link Base cameras

  • Highly reliable, 1 Gb/s data transfer rate with low, end-to-end latency

  • Enclosed unit, or OEM board set


  • eBUS Universal Pro driver

  • Sample applications and documentation

  • Support for CLProtocol

GigE Vision and GenICam

  • Fully compatible firmware load

  • Guarantees delivery of all packets

  • Comprehensive data transfer diagnostics

Video Formats

Tap Support

1 and 2 taps

Video Modes

Mono, BayerGR, BayerRG, BayerGB, BayerBG, RGB, YUV, YCbCr, Sparse Color Filter

Pixel Depth

8, 10, 12, 14, 16 bits


Pixel Clock

20 MHz to 85 MHz

Frame Buffer

120 MB

Programmable Logic Controller

  • Advanced image capture control

  • Integrated with GPIO


  • 2 LVDS/RS-422/HVTTL/±24V/±30V differential or single-ended inputs

  • 2 TTL/LVCMOS inputs

  • 3 TTL/LVCMOS outputs

Gigabit Ethernet-Based 

  • Low-cost, easy-to-use equipment

  • Compatible with 100/1000 Mb/s IP/Ethernet networks

  • Supports IEEE 802.3 (Ethernet), IP, IGMP v.2, UDP and ICMP (ping)

  • Long reach: 100 m point-to-point, further with Ethernet switches or fiber

Multicast capability 

Enables advanced distributed processing and control architectures


Size (L x W x H)

46 mm X 82 mm X 51 mm (enclosed)


  • -40°C to +85°C (OEM board set)*

  • -40°C to +60°C (enclosed)

Operating Temperature

-40°C to 85°C

Power Consumption

3.2 W

MTBF at 40°C

958,332 hours



SDR-26 (Mini CL) connector


RJ-45 with locking screw connector


12-pin circular connector

Power In

  • PoE powered on the RJ-45 connector: IEEE 802.3af

  • External powered on the 12-pin circular connector: 11.7 to 13 Volts nominal

Power Out

PoCL on the SDR-26 (Mini CL) connector


Ordering Information


iPORT CL-GigEB-IND Industrial-use External Frame Grabber in mountable enclosure, for Camera Link Base mode with extended operating temperature range, extensive GPIO, and power over Camera Link (PoCL)


iPORT CL-GigEB-IND Industrial-use External Frame Grabber OEM board set without enclosure, for Camera Link Base mode with extended operating temperature range, extensive GPIO, and power over Camera Link (PoCL). It includes a GPIO board assembly, flat flex cable, unsoldered 12-pin circular connector, and SDR-26 jack socket screws


iPORT CL-GigEB-IND Development Kit including 900-6010, Gigabit Ethernet desktop NIC, PoE injector, 2 Ethernet cables, and eBUS SDK USB Stick