dPict Imaging 10021-001 Aexeon Quattro PCI Frame Grabber
SKU
10021-001 Aexeon Quattro 64MB PCI BNC
Quick Overview
64MB PCI video acquisition frame grabber
Aexeon Quattro is a low-cost, real-time video acquisition and compression board for applications where multiple video streams are needed. Available in either PCI or PCI Express formats, Aexeon Quattro incorporates a digital media processor and on-board frame buffer for reliable capture for the most demanding application. Aexeon Quattro contains four independent full-resolution video channels capable of simultaneous streaming of real-time video to system memory or display. Aexeon Quattro also comes equipped with all the necessary I/O control to make application development easy.
Features:
- PCI or PCI Express formats
- Bus-mastering video acquisition
- Simultaneous viewing and acquisition of four real-time video streams
- 120 frames/sec viewing and capture
- Simultaneous real-time transfer of video to system memory, overlay, or display memory
- On-board JPEG compression
- TI DM642 Digital Media Processor
- 32 MB SDRAM Frame Buffer
- Smooth interpolated video scaling to arbitrarily sized windows
- Real-time multi-picture video output with OSD
- CCIR and square pixel capture resolution
- NTSC and PAL video formats
- Multiple board installation support
- Area of interest transfers to/from system and on-board memory
- On-board micro-controller for robust timing and capture control
- RS-232 serial input and output
- 8 General purpose I/O triggers
- 4 relay output alarms
- On-board watchdog timer
- On-board motion detection
- Real-time image processing
- Windows® 2000, and XP drivers
- Windows®-based video capture application
- DirectShow and TWAIN support
- Optional SDK with sample applications
| Form Factor | • PCI or PCI Express form factor • Scatter gather DMA support • PCI 2.2 compliant, 5V and 3,3V universal slot • PCI Express x1 connector |
| Video Input and Digitization | • 4 composite video inputs • NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc, 60), and SECAM (B, D, G, K, K1, L) support • Simultaneous color or monochrome support • Square pixel and ITU-601 resolution support • Software programmable control of gain, offset, hue, saturation, and sharpness • EEPROM for storing confi |
| Video Acquisition | • 4 real-time, full-resolution video acquisition channels • 120 frames/sec viewing and capture • Simultaneous viewing and transfer of 4 video inputs • Fully independent confi guration of frame rate, resolution, and compression parameters per channel • Smooth interpolated video scaling to randomly-sized windows • Bus-mastering video transfers to system memory, overlay, or display memory simultaneously. • Hardware overlay of graphics over video • RGB 32/24/16/15/8 and YUV 4:2:2 pixel formats • Area of interest transfers to on-board and system memory • 32 MB SDRAM frame buffer • Extensive interrupt control for robust capture |
| Video Output | • Composite video output with OSD • NTSC or PAL format • Real-time multi-picture (2x2) video output |
| I/O Triggers | • 8 programmable general-purpose I/O triggers • 4 solid-state relay output alarms |
| I/O Control and Processing | • On-board microcontroller for reliable capture and control • RS-232 serial interface • On-board watchdog timer • On-board motion or activity detection |
| Physical and Environmental | • 6.00" (length) x 4.20" (height) • Operating temperature: 0° C to 55° C • Relative humidity: 5% up to 95% non-condensing • FCC and CE approved |
| Available Software Developers Kit | • Compatible with dVeloper SDK • Windows® 2000 and XP DLLs • DirectDraw and DirectShow support • TWAIN support • Extensive documentation and sample code • dPiction Windows-based capture application • Sample applications with source code |