| Integrated
VGA Graphics Accelerator |
FlashPoint 4xl Plus utilizes a 143 MHz, 128-bit
3D graphics accelerator with 16 MB of local SGRAM
for image capture and display. The newly designed
PC host bus interface works with either 3.3V or
5V tolerant PCI slots, and is also available in
AGP 4X format. Display resolutions up to 1600x1200
with refresh rates up to 100 Hz in 8, 16, and 32
bit/pixel are supported. |
| Non-Destructive
Overlay Support |
FlashPoint
4xl Plus supports non-destructive overlay of text
and graphics on live video. This enables applications
that require graphic overlays to be displayed on
live video while the underlying video is cleanly
captured or displayed. |
| High-Quality
Video Capture |
FlashPoint
4xl Plus provides for high-quality capture from
up to 8 S-Video, or 16 composite video inputs in
either NTSC or PAL formats. Video is displayed in
a fully resizable window with smooth interpolated
scaling capabilities for arbitrary overlay sizes
up to 1280x1024. |
| Extensive
Camera Control |
FlashPoint
4xl Plus was designed for easy camera integration
and control. Power the camera from the fused and
switchable 12 volt power supply, control camera
operation by the RS-232 interface, or use the general
purpose input or output triggers to control specific
camera functions such as exposure control, all through
a single cable from the 4xl Plus's DB-25 connector.
FlashPoint 4xl Plus also incorporates an on-board
microprocessor to guarantee accurate synchronization
and robust triggering without relying on the host
CPU. |
|
Analog Video Inputs |
DB-25 connector
8 S-Video inputs
16 composite inputs
Video expansion header |
|
Bus
Format |
AGP 1x, 2x, and 4x compliant
PCI 2.2 compliant, 5V and 3.3V universal slot
|
|
Video Digitizer |
NTSC M, NTSC N, NTSC 4.43, NTSC-Japan, SECAM,
PAL BGDHI, PAL N, and PAL M format support
ITU-601 digitization
Software programmable digital control of offset,
gain, hue, and saturation
EEPROM for storing configuration and calibration
settings |
|
Video Scaling |
High-quality still frame image capture
Support for hardware pan and zoom up to 4 to
1 |
|
I/O Control |
Optically isolated output trigger for flash interface
1 general purpose TTL input trigger
2 general purpose TTL output triggers
|
|
External Control |
On-board microcontroller
RS-232 control
Camera exposure control
Programmable DAC output (0V-10V)
12-volt DC output for camera power supply (fused
at .75 amp)
|
|
Software |
Windows 9x, NT 4.0, 2000, and XP display drivers
Windows MCI and Video for Windows drivers
DirectDraw support
TWAIN driver
Windows-based FPG video capture application
Linux driver Support
|
|
Video Cables |
Variety of video input cables available
Custom Cables available upon request
|
