The Industrial Camera and Machine Vision Solutions Company








  ROHS Compliance









  >> Site Map

 

 

 











 

 

 

 

 

 
 
 
 
Home  |  General Information  |  Find a Rep  |  Trade Shows  |  Order  |  Contact  

 Firewire  |  PoCL  |  Progressive Scan  |  Interlaced  

Hitachi Kokusai Electric America
Hitachi KP-F39 PCL
PoCL (Power over Camera Link) Camera
(view product catalog in ADOBE PDF)

Hitachi KP-F39 PCL PoCL Cameras

The PoCL version is connected by a single (PoCL) Mini Camera Link cable directly to a frame grabber supporting PoCL. Simple systems construction is possible.

  • High Resolution & High Speed
    High resolution combined with high frame rates are possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications.
  • Frame Shutter
    Higher resolution in the vertical directional is ensured for moving object.
  • Multi-step Shutter
    Provided multi-step shutter or variable shutter (minimum 1/100,000 second) .
  • Frame on Demand
    The trigger and the shutter can be used to capture an image at the desired timing and the accumulation time.
  • Remote Control
    Through the Camera Link interface, various setting such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.

Specifications

Imager 1/3-inch interline CCD
Total pixels 692 (H) x 504(V)
Effective pixels 659 (H) x 494(V)
Active pixels 659 (H) x 494(V)
Pixel size 7.4 (H) x 7.4 (V) um (square lattice)
Sensing area 4.88 (H) x 3.66 (V) mm
Scanning system Progressive
Aspect ratio 4:3
Frame rate 91 frames/second
Scanning frequency Horizontal: 46.875 kHz
Vertical: 91.73 Hz
Sync system Internal
Lens mount C mount (Flange focal distance=17.526 mm)
Video output Digital output Camera Link
Clk = 36 MHz
Resolution Horizontal: 500 TV line
Vertical: 490 TV lines
Sensitivity 400 lx, F4, 3200 K
Minimum illumination 7.4 lx, F1.4, MAX GAIN,
without IR cut filter
Signal noise to ratio 50 dB
Electronic shutter speed 1/91, 1/250, 1/500, 1/1000,1/2000, 1/4000, 1/10000, 1/50000 second.
Factory setting is off (1/60 second)
or changeable by variable shutter (Minimum 1/100000 second)
Gamma compensation y = 1
Frame on demand Fixed shutter, one trigger and VD reset (Factory setting is all off)
Partial scan Selectable start position and width of picture grabbing in 1H step.
Ambient temperature Operating: 0 to + 40°C (+32 to +104ºF), less than 90 % RH
Storage: -10 to + 50°C (+14 to +122ºF), less than 70 % RH
Power supply 12 ±1 VDC
Current consumption Approx. 160 mA (Approx. 2.0 W)
External dimensions 29 (W) x 29 (H) x 29 (D) mm
Mass Approx. 50 g


<< Our Industry Blogs - Carolynn's | Nicole's >>
© 2008 Aegis Electronic Group Inc., All Rights Reserved.