|
Image Device |
1/3
type Progressive Scan CCD |
|
Effective Pixel Elements |
640 x 480 (VGA) |
Cell Size
|
7.4 x 7.4 µm |
Frame Rate
|
60 fps (VGA) |
Gain Control
|
Manual (0 to 18
dB, 1 dB step) |
Lens Mount
|
C Mount |
Electronic Shutter
|
2 to 1/50,000 s
(trigger mode)
2 to 1/100,000 s (free run mode) |
Binning Function
|
Vertical / Horizontal
Binning |
Partial Scanning Function
|
Vertical Random
Scanning - 30 to 480 lines, 30 line steps
Horizontal Random Scanning - 192 to 640 pixels,
64 pixel steps
Typical Frame Rate - 300 fps (30 lines) |
External Trigger Input
|
Pulse-edge
detection mode/pulse-width detection mode
|
External Trigger Input voltage
|
Low : 0 to +0.5
V, High : +4.5 V to +24 V
|
Trigger Delay Function
|
0 to 4 s, 1ms steps |
Strobe delay to start exposure
|
-67 µs to
+60 µs, 1 µs step |
External trigger latency
|
Less than 10 µs |
Hardware Look Up Table
|
Gamma compensation,
binarization, negative/positive reverse |
Hardware 3 x 3 filter
|
Edge detection,
Sharpness, etc. |
CPU
|
X86, AMD Geode
GX 533, 400 MHz |
|
Memory |
256 MB DDR-SDRAM,
128 MB Compact Flash |
Operating System
|
Monta Vista Linux
Professional Edition 3.0 (built-in) |
|
Operating System |
Windows XPe (downloadable
SDK option) |
Ethernet
|
10Base-T/100
Base-TX (Network protocols: TCP/IP (IPv4), HTTP,
FTP) |
Monitor Output
|
D-sub 15 pin
for multi scan monitor |
USB
|
Version 1.1 |
Serial Interface
|
RS-232C |
Digital I/Os
|
TTL IN/OUT, Isolated
IN/OUT, Trigger IN, Exposure OUT |
Minimum Illumination
|
1 lx (F1.4, +18
dB gain) |
Power Requirements
|
10.5 to 26.4 V |
|
Power Consumption |
7.5 W |
|
Dimensions |
55 x 55 x 110 mm
(2-1/4 x 2-1/4 x 4-3/8 inches) |
|
Mass |
400 g (14 oz) |
|
Operating Temperature |
-5 to +45°
C (23 to 113°F) |
|
Storage Temperature |
-20 to +60°
C (-40 to 140°F) |
Operating Humidity
|
20 to 80% non condensing |
|
Storage Humidity |
20 to 95% non condensing |
|
Vibration |
10G (20 to 200
Hz) |
| Shock Resistance |
70G |
|
Regulations |
70G |
